When integrating a C-series with UCSM, it is possible under some circumstances to see dual adapter cards, even though the rack mount server only has 1 adapter card installed in it. A closer look at the adapter card will reveal that one of them has a bogus serial number. You will also notice that a service profile will not associate to the rack mount server. It will be stuck in the following state in the FSM of the server:
The defect that identifies this issue is: CSCtl41022. This issue is resolved in 1.2(2i) and above. The C-series server will need to be decommissioned from UCSM in order to upgrade the firmware on it.
On a side note, the following guide outlines integrating a C-Series server with UCSM:
http://www.cisco.com/en/US/partner/docs/unified_computing/ucs/c/hw/C250M1/install/ucsm-integration.html
No comments:
Post a Comment